Disconnecting The Optional Electric Hose-Reel Kit; Disconnecting The Optional Hand Spray-Wand Kit - Toro Multi Pro 1750 Installation Instructions Manual

Disconnecting the Optional Electric
Hose-Reel Kit
1. Remove the hose clamp that secures the supply hose to
the barbed fitting at the inlet swivel of the reel
12).
Figure 12
1. Barbed fitting (inlet swivel)
2. Hose clamp
2. Remove the supply hose from the barbed fitting
12).
3. Remove the inlet hose from the support clamp at the
forward strap of the sprayer tank.
Note: You no longer need the supply hose and
you will remove it with the boom section valves in
Removing the Boom-Section Valves (page
(Figure
3. Supply hose (hose reel)
(Figure
11).
Disconnecting the Optional Hand
Spray-Wand Kit
1. Remove the hose clamp that secures the supply hose to
the barbed fitting of the spray gun
1. Supply hose (hand spray
wand)
2. Hose clamp
2. Remove the supply hose from the barbed fitting
13)
Note: You no longer need the supply hose and
you will remove it with the boom section valves in
Removing the Boom-Section Valves (page
5
10
(Figure 13).
Figure 13
3. Barbed fitting (spray gun)
11).
(Figure
5