Installing The Agitation Supply Hose - Toro Multi Pro 1750 Installation Instructions Manual

Figure 65
1. Return hose—2.5 x 71 cm (1 x 27-7/8 inches)
3. Assemble the 90° barbed fitting of the return hose into
the rear port of the inboard T-fitting
4. Secure the 90° fitting to the T-fitting with the retainer
(large) that you removed in step
Return, Sprayer-Supply, and Bypass Hoses (page
(Figure 64).
1 of Disconnecting the
14).
32

Installing the Agitation Supply Hose

1. Assemble the quick-connect fitting (straight barbed) of
the agitation supply hose—2.5 x 72 cm (1 x 28-1/4
inches) onto the quick coupling of the agitation control
valve with the retainer that is supplied with the hose
(Figure 66).
Figure 66
1. Retainer
2. Quick-connect fitting
(agitation control valve)
3. Quick-connect fitting
(straight barbed)
2. Route the hose to the agitation throttle valve
67).
4. Quick-connect fitting
(agitation throttle valve)
5. Agitation supply hose—2.5
x 72 cm (1 x 28-1/4 inches)
(Figure