Toro Multi Pro 1750 Installation Instructions Manual page 4

Procedure
Sprayer supply hose—2.5 x 73 cm (1 x
28-7/8 inches)—machines without the
optional eductor kit
Flange clamp—40 to 64 mm (1-9/16 to
2-1/2 inches)
Gasket—25 x 35 mm (1 x 1-3/8 inches)
Support clamp—machines without the
optional eductor kit
Flange-head bolt (5/16 x 3/4
inch)—machines without the optional
15
eductor kit
Flange locknut (5/16 inch)—machines
without the optional eductor kit
Lower supply hose—25 x 66 cm (1
x 25-3/4 inches) machines with the
optional eductor kit
Retainer (small)—machines with the
optional eductor kit
Upper supply hose—25 x 22 cm (1 x
8-5/8 inches) machines with the optional
eductor kit
Section bypass hose—2.5 x 146 cm (1
x 57-1/2 inches)
Supply hose—left-boom section—2 x
205 cm (3/4 x 80-13/16 inches)
16
Supply hose—center-boom section—2
x 58 cm (3/4 x 22-13/16 inches)
Supply hose—right-boom section—2 x
170 cm (3/4 x 66-13/16 inches)
Cap and retrainer
Straight barbed fitting (1/2 inch)
Quick-connect fitting (socket)
Hose clamp 13 to 32 mm (1/2 to 1-1/4
inches)
Hose—1.3 x 762 cm (1/2 x 300 inches)
17
Hose—1.3 x 180 cm (1/2 x 83 inches)
2412-36 Hose clamp 6 to 11 mm (1/4
to 7/16 inch)
Bypass shutoff valve
Section bypass hose—2.5 x 146 cm (1
x 57-1/2 inches)
Eductor supply hose 2 x 88 cm (3/4 x
18
34-11/16 inches)
Retainer (small)
19
No parts required
20
No parts required
Description
4
Qty.
1
2
2
1
1
Install the sprayer supply hose.
1
1
1
1
1
1
Install the spray valve hoses.
1
1
1
1
1
2
Install the shutoff valve and hose for
1
the optional spray gun kit or electric
1
hose-reel kit.
2
1
1
1
Install the hose for the optional eductor
kit.
1
–
Connect the pressure sense tube.
Complete the installation of the GeoLink
–
spray system-finishing kit.
Use