Kegel IKON Lane Machine Operation Manual page 93

Table of Contents

Advertisement

Daily Maintenance
1. The felt in the compartment must be wiped down and the drip pads on each
side of the machine must be wiped off.
2. Wipe around the moving head and check each end of the head bar.
3. All surfaces around the oil compartment should be wiped down.
4. Make certain that the moving head bar does not get dry in either the oil or
cleaning compartments, but DO NOT over-oil, just a film of oil is all that is
needed.
5. Remove lint from transfer brush.
6. DO NOT wipe down the buffer brush unless some sort of build up is occurring on
the ends of the buffer. Build up could be the result of dirty gutters.
Clean the conditioning compartment every day!!!
We do not recommend using alcohol to clean the plastic tanks.
Monthly Maintenance
1. Remove guards from both sides of machine to clean and inspect motor and
sensor shaft.
2. Lightly oil sensor extension shaft and bushings in the cleaning compartment.
3. Inspect buffer belt and its tension.
4. Oil buffer belt idler.
5. Check and inspect sliding head belts.
6. Clean and inspect the compartment that contains the conditioner (oil) tank
and pump.
7. Clean the transfer brush. Take an air compressor and blow out the transfer
brush while loosening up the dirt with your hand.
Annual Maintenance
If you are a real neat freak you could do things like this:
1. Remove any component that prevents you from cleaning the machine entirely.
If you are doing good daily cleaning you may do this every two years because
your machine still looks like new!
2. Replace buffer and sliding head belts with new ones. (If running 60 lanes or more
a day this may not be a bad idea. This all depends on how the machine was
treated over the last year.)
3. Inspect oil pump compartment.
4. Replace buffer brush if needed. If your buffer bristles begin to feel very soft then
it is time to replace your brush. The ends of the brush normally go bad first due
to dust from the gutters and lane contact.
5. Inspect and clean transfer brush assembly completely.
80

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ikon17-590017-5950

Table of Contents