Chapter 8; Preventive Maintenance; Lid And Guard Removal - Kegel IKON Lane Machine Operation Manual

Preventive Maintenance

Lid and Guard Removal

In some cases it may be necessary to remove the Lid and/or side covers to access
certain areas of the lane machine.
Conditioner Compartment Lid Removal
To remove the lid, set the machine down in the operating position.
1. Slide the conditioning compartment lid back as shown in the pic below left.
2. Reach your hand under the lid and locate the Lid Pin and pull the spring
loaded pin from the pin guide.
3. Do the same for both the 7 pin and 10 pin sides.
4. Tilt the lid assembly up and slide the rear lid pins up and out of the middle
guides.
Cleaning Compartment Lid Removal
To remove the lid set the machine down in the operating position.
1. In the operating position, stand facing the lane machine from the cleaner
compartment side and push the lid all the way away from you.
CHAPTER
Lid Pin
76
8