Kegel IKON Lane Machine Operation Manual page 85

6. Machine strips only 'where' cleaner is applied on the lane.
a. The duster is definitely not touching the lane.
7. Machine drips dirty cleaner and oil off of the squeegee.
a. Rear squeegee blade is not clearing the tail plank. It is very important
that the rear squeegee blade clears the pin deck completely.
b. The squeegee double wipe function has been turned off.
c. Filter in recovery tank is plugged up.
d. Vacuum hose is plugged up with hair and all kinds of nasty stuff.
e. Vacuum motor is failing.
8. Machine pushes cleaner into the gutters and excessive amounts into the
pinsetter.
a. The 'Not Me' employee forgot to put the recovery tank in the machine
(been there...done that).
b. Vacuum hose has come off.
c. Real nasty clog in vacuum hose after the squeegee head.
d. Applying too much volume while the machine is traveling too fast.
9. Machine is leaking cleaner.
a. Tubing in pump failed or has come loose and needs to be replaced.
b. Tubing connector failed or came loose.
c. Tank is leaking around fittings.
d. Operator over-filled machine and made a mess.
10. Duster cloth hangs down on one side and sometimes touches the lane when
the machine exits from of the lane.
a. Duster switches are out of adjustment; contacting one switch too soon.
b. Duster plug bolt is loose from the side of the machine.
c. Duster switch is broken on one side.
d. Cushion Roller may be on the large side.
e. Duster cloth stretched and needs to be balanced and tightened up.
f. Duster motor brake is not holding (or working at all).
g. New roll of duster cloth was not checked after installation.
h. This machine may need a special adjustment to the program. Please
call for Technical Support at 863-734-0200.
72