Kegel IKON Lane Machine Operation Manual page 35

By pressing the START OIL VOLUME TEST button, the oil head will then begin to
move back and forth, dispensing conditioner, until all of the boards for that
particular program have been reached.
Once complete, remove the tip from the oil tank and place inside a clean
graduated cylinder and perform the test a second time. The correct amount of
conditioner in the cylinder should match what the program worksheet has for
total volume. If an oil pump adjustment must be made, open the splash guard
to access the oil pump assembly.
Conditioner pump adjustments are done by manually turning the Oil Pump
assembly.
 If an increase to the amount of conditioner is needed, turn the oil pump
towards you.
 If a decrease to the amount of conditioner is needed, turn the oil pump
away from you.
TECHNICAL NOTE
To achieve full control of your lane maintenance program, as well as peace
of mind, this process should be done daily! It's much easier to catch a
mistake during this process than having a 100 angry bowlers yelling at the
poor person working the front desk that night!
To change the program # to test, press the
top line and a numbered Keypad will be
displayed. Simply change the number in the
keypad that will pop up and tap on OK.
After the correct program has been
selected, press on the line directly below
that says 'Start Oil Volume Test'.
22