Kegel IKON Lane Machine Operation Manual page 90

2. Standing in front of the machine, lift the cleaner lid assembly up and out of the
guides. Pull the back of the lid towards you and lift the rear portion up and out
of the guides as well.
Front Cover removal
To remove the front cover, simply unfasten the 4 screws that secure the
top of the cover, and remove from the attaching pins located on the
bottom.
Rear Cover removal
With the machine in the up-right transport
position, locate the two screws that are on the
inside front panel and below the buffer brush
assembly. As shown to the right.
After removing these, set the machine down into the operating position.
77