Kegel IKON Lane Machine Operation Manual page 20

11. Loosen the fasteners for the Main Control Plate to lift it out of the way and show
the batteries and the motor chain adjustments.
12. Open the Splash Guard and describe all of the components behind it.
13. Discuss how the cleaner tank can do up to 50 lanes depending on cleaner
volume settings and show how this adjustment is made (Chapter 3). The
recovery tank holds what the cleaner supply tank dispenses (and it is heavy
when full).
14. Explain how the duster functions during the application.
15. Stop and take a break...let some of the information sink in and consider getting
something to drink. Reassure them that Kegel provides many resources with this
information.
16. Point out the KOSI software located on the USB storage key that was provided
for their PC. Some may want to install it right away. (The CP1H PLC requires a
different cable than the other Omron PLCs.)
17. View all of the menus on the touchscreen.
Now that a thorough overview of the machine has been completed,
1. When the machine is powered ON the touchscreen will illuminate. Line the
machine up with lane as if you are ready to operate.
2. Using the touchscreen, perform the starting sequence to run the machine.
3. Watch the machine operate on the lane and monitor the speeds. Make
certain they are in the proper range for each speed.
4. When the machine enters the pin deck check to see if the squeegee
completely clears the pin deck.
5. Explain the squeegee wipe function when the machine enters the pin deck
and how this is meant to remove any excess drips of cleaner that could fall off
on the lane or approach.
6. Monitor the machine back to the foul line.
7. After operation, review proper steps to transport, clean, and charge the
machine for its next use. Tell them to read this Operators Manual and show
them how the manual is organized to help them find what they are looking for.
we are ready to crank it up!
7