Datavideo HS-1300 Instruction Manual page 57

TS IP
The TS IP address is 239.100.100.101 by default.
Video Only
Enable this option if you just want to stream the video
without the audio.
Stream Type – SRT
SRT Port
The SRT port is 9001 by default.
Play URL
A stream URL will be generated after the Start button is
clicked.
Record Encoder Settings
Bitrate Mode
The bitrate mode sets the video bitrate mode for your video stream. The
available modes are high, mid and low.
Note: You are allowed to switch between different bitrate modes by
pressing the Bitrate button on the Record/Stream panel. See
for details.
Resolution
Recording resolution is the number of pixels (dots) used to create an
image. Higher resolutions use more pixels to create an image. This means
that greater amounts of detail can be expressed in the image, but larger
files sizes and a greater amount of storage (i.e. hard drive space) are
required to save the images or video.
57
Section 5.4