Datavideo HS-1300 Instruction Manual page 114

7 How to remove the clip stored in the CH6
buffer after the Clip transition is disabled?
8 A few important things to note about
operating the NVS-31.
You should first clear the clip buffer using the
Delete Clip option in the User Mems sub
menu, and then set CH6 to live or still in the
Inputs sub menu.
Because the NVS-31 UI is not updated in real
time so the UI status display may not reflect
the current device status.
As a result, whether the device is operated on
the panel, on the UI or both, please refresh the
status page from time to time to make sure the
information shown is the latest. You should
also constantly monitor your video recording
and streaming at the same time.
114