Datavideo HS-1300 Instruction Manual page 47

-
Make sure no other devices are connected to the LAN (wired or wireless) because this may
result in IP conflicts.
 Login the NVS-31 via a web browser.
-
Default user name is admin
-
Default password is 000000
 Click the "System" tab then on the system page, enter network settings such as static IP and
default gateway. Make sure that the default gateway matches your connected network and no
device shares the same IP as the NVS-31.
For example, if your router's default gateway IP is 10.10.1.1, then in the default gateway field, you
should also enter 10.10.1.1. Then set the IP address of the NVS-31 to 10.10.1.X, which can range
from 10.10.1.2 to 10.10.1.255. Pick an unused IP address.
 DHCP：Disable
 Static IP：X.X.X.Y；the first three decimal numbers must be the same as your router or switch. The
number Y must be a number not used by any devices connected to the network.
 Subnet Mask：255.255.255.0
 Default Gateway：Z.Z.Z.Z；same as the gateway IP of your router or switch.
Note: Some router may require special gateway IP setting; instead of the standard 192.168.1.1.
Therefore, you should check the network properties on the PC before switching to the fixed IP
mode.
For example, some routers have a gateway IP of 192.168.1.254 and as a result, the default
gateway and primary DNS fields on the NVS-31 must also be configured to 192.168.1.254.
 Primary DNS: Same as the default gateway IP, which, if causing issues, can be changed to 8.8.8.8 or
8.8.8.4 (Public DNS provided by Google).
 Click the "Submit" button to save the network settings.
 Reconnect the PC and the NVS-31 to the network.
 Restore the PC's original network settings.
 Shut down the HS-1300; wait for approximately five seconds before turning the HS-1300 back ON.
 You should be able to access the NVS-31 through the fixed IP address.
47