Datavideo HS-1300 Instruction Manual page 90

 Since the HS-1300 has a default IP address of 192.168.100.101 so the computer should be given the
IP settings that match the same IP range as the switcher.
 Turn on the Windows computer and manually set the IP to 192.168.100.X within the Windows
Network and Sharing Centre.
 Now install the Switcher Image Import/Export utility on the computer.
 After the utility is installed, click and open the user interface as shown below.
Click Setup on the MENU SELECT pane
and if the connection between the HS-
1300 and the PC has been successfully
established, you will be able to see the
network information of your switcher.
Select Import-Export from the yellow
menu options.
90