Optex VIRTUAL LOOP OVS 01GT Manual page 13

Input
Human detection (HD) mode
If no closed connection is made on
the input terminal, the device will
stay at "Enhanced" sensitivity.
Then, the device will go off by a
human presence.
Physical
circuit
trigger type
status
Normally
Wake L Open
Normally
Wake H Open
Closed
Normally
Inhibit L Open
Inhibit Normally
Open
H Closed
Copyright (C) 2016 OPTEX CO., LTD.
Wat happens
Input
when
triggered
Enhances the
sensitivity of
Open
detection
Enhances the
sensitivity of
detection
Mute the
sensitivity of
Open
detection
Mute the
sensitivity of
detection
CONFIDENTIAL
Note
The default setting
If no closed connection is made,
the device will stay at "Enhanced"
sensitivity.
(No human cancellation)
The device will not detect when
the input circuit is closed.
If no closed connection is made,
the device will stay at muted.
(No trigger at all)
13