Set Server Parameter Values - Vivotek FD7132 User Manual

Set server parameter values

Note: The access right depends on the URL directory.
Method: GET/POST
Syntax:
http://<servername>/cgi-bin/anonymous/setparam.cgi? <parameter>=<value>
[&<parameter>=<value>...][&update=<value>][&return=<return page>]
http://<servername>/cgi-bin/viewer/setparam.cgi? <parameter>=<value>
[&<parameter>=<value>...][&update=<value>] [&return=<return page>]
http://<servername>/cgi-bin/operator/setparam.cgi? <parameter>=<value>
[&<parameter>=<value>...][&update=<value>] [&return=<return page>]
http://<servername>/cgi-bin/admin/setparam.cgi? <parameter>=<value>
[&<parameter>=<value>...][&update=<value>] [&return=<return page>]
PARAMETER VALUE
value to assigned
<group>_<name>
update <boolean>
return <return page>
Return:
HTTP/1.0 200 OK\r\n
Content-Type: text/html\r\n
Context-Length: <length>\r\n
\r\n
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
DESCRIPTION
Assign <value> to the parameter <group>_<name>
set to 1 to actually update all fields (no need to use update
parameter in each group)
Redirect to the page <return page> after the parameter is
assigned. The <return page> can be a full URL path or
relative path according the the current path. If you omit
this parameter, it will redirect to an empty page.
(note: The
file(.htm, .html) or a Vivotek server script executable
(.vspx) file. It can not be a CGI command. It can not have
any extra parameters. This parameter must be put at end
of parameter list)
return page can be a general HTML
User's Manual - 77