Vivotek FD7132 User Manual page 56

VIVOTEK - A Leading Provider of Multimedia Communication Solutions
Event name: Enter a descriptive name for the event setting.
Enable this event: Select this option to enable this event setting.
Priority: Select the relative importance of this event (High, Normal, or Low). Events with higher priority
setting will be executed first.
Detect next event after
motion is detected.
An event is an action initiated by user-defined trigger source; it is the causal arrangement of the following
three elements: Trigger, Event Schedule, and Action.
Trigger
Also referred as the cause or stimulus, defines when to trigger the Network Camera. The trigger source
can be configured to use the Network Camera's built-in motion detection mechanism or external digital
input devices.
There are four choices of trigger sources as below. Select the item to display the detailed configurations.
■ Video motion detection
This option makes use of the built-in motion detection mechanism as a trigger source. To enable this
function, you need to configure Motion Detection window first. For more information, please refer to
Motion detection on page 50 for details.
■ Periodically
This option allows the Network Camera to trigger periodically for every other defined minute. At most
999 minutes can be set.
56 - User's Manual
seconds: Enter the duration in seconds to pause motion detection after a