Using 3Gpp-Compatible Mobile Devices - Vivotek FD7132 User Manual

VIVOTEK - A Leading Provider of Multimedia Communication Solutions

Using 3GPP-compatible mobile devices

To view the streaming media through 3GPP-compatible mobile devices, make sure the Network
Camera can be accessed from the Internet. For more information on how to set up the Network
Camera over the Internet, please refer to Setup the Network Camera over the Internet on page 9.
To utilize this feature, please check the following settings on your Network Camera:
1. Because most players on 3GPP mobile phones do not support RTSP authentication, make
sure the authentication mode of RTSP streaming is set to disable.
For more information, please refer to RTSP Streaming on page 39.
2. As the 3G network bandwidth is limited, you can't use large video size. Please set the video
and audio streaming parameters as listed below.
For more information, please refer to Audio and video on page 44.
Video Mode
Frame size
Maximum frame rate
Intra frame period
Video quality (Constant bit rate)
Audio type (GSM-AMR)
3. As most ISP and players only support port number 554 to allow RTSP streaming to go
through, please set the RTSP port to 554. For more information, please refer to RTSP
Streaming on page 39.
4. Launch the players on 3GPP-compatible mobile devices (ex. Real Player).
5. Type the URL commands in the player.
The format is rtsp://<public ip address of your camera>:<rtsp port>/<RTSP streaming access
name for stream1 or stream2>.
For example:
16 - User's Manual
MPEG-4
176 x 144
5 fps
1S
40kbps
12.2kbps
rtsp://192.168.5.151:554/live.sdp