Application - Vivotek FD7132 User Manual

Application

Advanced mode
This section explains how to configure the Network Camera to react in response to particular
situations (event). A typical application is that when a motion is detected, the Network Camera
sends buffered images to a FTP server or e-mail address as notifications.
In the illustation on the right side, an event
can be triggered by many sources, such
as motion detection or external digital input
devices. When an event is triggered, you can
specify what kind of action will be performed.
You can configure the Network Camera
to send snapshots or videos to your email
address or FTP site.
Event Settings
In the Event Settings column, click Add to open the Event Settings page. In this page, you can
arrange three elements -- Trigger, Schedule and Action to plot an event. A total of 3 event settings can be
configured.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
Event Trigger
ex. Motion detection,
Periodically, Digital input,
System reboot
Action
(what to do)
Media
(what to send) (where to send)
ex. Snapshot, video clips,
ex. Email, FTP, HTTP server,
system log, digital output
network storage,
CF card
User's Manual - 55
Server