Vivotek FD7132 User Manual page 111

IP filtering
Note: This request requires administrator access privilege
Method: GET/POST
Syntax:
http://<servername>/cgi-bin/admin/ipfilter.cgi?
method=<value>&[start=<ipaddress>&end=<ipaddress>][&index=<value>]
[&return=<return page>]
PARAMETER VALUE
Method addallow
adddeny
deleteallow
deletedeny
start <ip address>
end <ip address>
index <value>
return <return page>
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
DESCRIPTION
Add a set of allow IP address range to server. Start and
end parameters must be specified. If the index
parameter is specified, it will try to add starting from
index position.
Add a set of deny IP address range to server. Start and
end parameters must be specified. If the index
parameter is specified, it will try to add starting from
index position.
Remove a set of allow IP address range from server. If
start and end parameters are specified, it will try to
remove the matched IP address. If index is specified, it
will try to remove the address from given index position.
[start, end] parameters have higher priority then the
[index] parameter.
Remove a set of deny IP address range from server. If
start and end parameters are specified, it will try to
remove the matched IP address. If index is specified, it
will try to remove the address from given index position.
[start, end] parameters have higher priority then the
[index] parameter.
The start IP address to add or to delete.
The end IP address to add or to delete.
The start position to add or to delete.
Redirect to the page <return page> after the parameter
is assigned. The <return page> can be a full URL path or
relative path according the the current path. If you omit
this parameter, it will redirect to an empty page.
User's Manual - 111