Silvercrest TRITACARNE SFW 350 D3 Operating Instructions Manual page 65

Non-functionality
If the drive is blocked by accumulated food:
■ Press the button "0" a to stop the meat grinder .
■ Press and hold the button "<" s . The appliance will now run in the reverse
direction . This enables you to transport the food which has become stuck a
short way backwards, and the motor to run freely again .
■ When the drive runs smoothly again, release the "<" s button .
■ Press the button "I" p to re-start the meat grinder .
■ If you do not succeed in getting the drive free with this, clean the appliance
as described in the chapter "Cleaning" .
Should the motor suddenly stop, it could be due to automatic
activation of the internal overload fuse . This is intended to
protect the motor .
■ Switch the appliance off and allow it cool down for approximately 30 minutes
before continuing to use it .
■ Should this not work, wait for a further 15 minutes .
■ If it still does not function at the end of this period, this indicates a technical
problem . In this case, contact the Customer Service Centre .
If the power cable is damaged or the accessories are
visibly damaged:
■ Immediately switch the appliance off by pressing the "0" a button!
■ If this is not possible without risk to personal safety, disconnect the plug from
the mains power socket .
■ Arrange for the defective parts to be repaired by Customer Services before
re-using the appliance .
Cleaning
RISK OF ELECTRIC SHOCK
► Disconnect the plug from the mains power socket before cleaning the appli-
ance . In this way accidents caused by the inadvertent switching on of the
appliance and electric shocks can be avoided .
│ GB │ MT
■ 62
SFW 350 D3