Silvercrest TRITACARNE SFW 350 D3 Operating Instructions Manual page 57

Assembly / Disassembly
CAUTION - PROPERTY DAMAGE!
► All accessories are coated with a thin film of oil to protect them from corrosion .
Therefore, carefully clean all of the parts before using the appliance for the
first time, as described in detail in the chapter "Cleaning" . After subsequent
usage, always apply a light coating of cooking oil to the metallic components .
NOTICE
► Before using for the first time, remove the protective foil from the control panel .
Assembling the meat grinder
Unfold the fold-out side . There you will find the step-by-step illustrations for as-
sembling the appliance .
1) Place the transport screw q in the meat grinder casing 6 .
2) Place the spring w onto the transport screw q .
3) Then fit the cross blade e on so that the sharp side points away from the
spring w . Ensure that the square opening in the cross blade e is placed
correctly on the square axle .
WARNING! RISK OF INJURY!
► The cross blade e is very sharp! Risk of injury!
CAUTION - PROPERTY DAMAGE!
► The appliance will be damaged if the cross blade e is inserted the other
way around!
4) Select the appropriate cutting disc r .
│ GB │ MT
■ 54
SFW 350 D3