Dataprobe iBoot-G2+ Manual page 12

its origin al condition. To abort a power cycle, select the
Off buttons . iBoot-G2+ will assume the status selected.
Expansion Set for Independent I/
The Control and Status page will display the Main
Outlet, with power control buttons underneath.
status of Exp1 and Exp2 Inputs and Outlets are
d isplayed beneath the Main Power.
power, or to change
t he appropria te button.
AutoPing Enabled:
If the AutoPing features is in use, the page will also
display the current status, OK or Failed, for each
AutoPing used, with a counter showing how many times the Action was
nnecting with the Admin credentials, reset buttons for the
triggered. If co
T rigger counters are provided.
H eartbeat Enabled:
If the Heartbeat feature is enabled, the page will dis
OK or Fail of the Heartbeat, with a counter showin
Action was triggered. If connecting with the Admin c
for the Trigger counters are provided.
Navigation Buttons:
Refresh: Use the Refresh button to obtain the latest status of iBoot. Using your browser's refresh button can
lead to in advertent power switching. If an NTP server is being used, the time of the last refresh will be shown
in the up per right corner.
Setup: T o access the Setup page, the administrator credentials must be used for the ini
Logout: When you are finished with iBoot, click on
Logout. A confirmation page will be displ
If another user is logged into the iBoot-
Use page will be displayed.
V100915E
O Mode:
To control the
the status of Exp1 or Exp2, select
ayed.
G2, an In
iBoot-G2+
desired outlet and click on either Power On or Power
The
play the current status,
g how many times the
redentials, reset buttons
tial login.
Page 12