Dataprobe iBoot-G2+ Manual page 10

5.1. Other ways to set the IP Address
1. Automatically from a
2. Web Browser via the Set-up Page
3 . CLI (Telnet & USB)
iBoot-G2+ comes with factory installed IP addre
Setting the IP address from a DHCP Server
A DHCP server will automatically assign an IP address (dynamic address) as well as Subnet Mask and
Gateway to the iBoot. If you reboot
able to assign an IP address
D HCP server or use the iBoot-G2+ Setup Utility to see what address is assigned to the iBoot. You can lock
the iBoot-G2+ to the current
IP Mode either by usin
I f y ou set the IP address using another method, the address become
addressing using DHCP, select DHCP mode in Net
Setting the IP address using Web Browser
To set the IP address using a Web Browser, connect the Ethernet conn
p ower to iBoot.
Open your browser and access iBoot-G2+ by enteri
your browser's Address window. Enter the adminis
on Page 14.
V100915E
DHCP Server
the iBoot-G2+ with the IP Mode set for DHCP, the DHCP server will be
. Once an IP address is assigned, you must check the
address, by selecting IP Mode = Static without changing the addresses. Set the
g the w eb setup page, or via Telnet commands.
iBoot-G2+
ss 192.168.1.254.
s static . To return iBo
work Setup and reboot t he unit.
ection to your local network and apply
ng the default (192.168.1.254) or current IP address into
trator credentials, click on Setup and follow the instructions
ot-G2+ to dynamic
Page 10