Advertisement
10. Fill oiler with Hunter Lubri-Oil supplied or ONLY mineral oil. NEVER USE air tool oil or ATF.
11. Assemble the bead depressor traction bar by securing the plastic wedge with the long screw at the end of the
traction bar (Fig. 81).
12. Fully secure both screws (Fig. 82).
13. Place accessories on the tire changer.
NOTE:
14. Verify operation.
IMPORTANT:
15. Train management and technicians on operation and maintenance of the tire changer.
LONG SCREW
SHORT SCREW
TRACTION BAR
Always generously lubricate all sides, including
the bottom, of new tool heads with tire lube
paste before first use (Fig. 83).
After turning on the TCA28 the user must wait 30 seconds for the inverter to
learn the position of the rotation pedal potentiometer before operating the
tire changer.
Fig. 81
Fig. 82
27
Fig. 83
Advertisement
