Advertisement
4. Route the two "wheel lift cylinder" air lines out of the lower rear port with grommet (Fig. 42 - Fig. 43).
5. Route the "manifold" air line out of the lower rear central port. Remove the existing plug and connect the
"manifold" air line (Fig. 44 - Fig. 45).
6. Position the wheel lift valve and pedal assembly in the front of the tire changer (Fig. 46) and secure with
hardware previously removed (Fig. 47).
Fig. 42
Fig. 44
Fig. 46
16
Fig. 43
Fig. 45
Fig. 47
Advertisement
