Advertisement
Install Air Tank - Without Wheel Lift
NOTE:
1. Secure the air tank to the rear of the tire changer with the bolts, washers and nuts provided (Fig. 27). Larger
bolt / washer / nut is on the top of the air tank bracket (Fig. 28).
2. Locate and connect the black air line to the blast inflation hose valve (Fig. 29). Locate and connect the blue air
line to the fitting on the side of the tank (Fig. 30).
If installing a wheel lift, refer to "Install Air Tank and Wheel Lift - (for models
with wheel lift)", page 14.
Fig. 27
Fig. 29
12
Fig. 28
Fig. 30
Advertisement
