Teknion Beginning Work Table Installation Manual page 9

interpret
Installation Guides
Section: TABLES
Description: WORK TABLE BEGINNING. MIDDLE, FINISH WITH STRAIGHT AND ANGLED LEGS
CONNECT MID GABLE AND BEAMS
AC1
Mid Gable Connection
STEP 5: Bring Mid Gables and Transverse Beam Assembly together. Line up the set of holes
on the top of Gable Cross Beams with Clamp Brackets holes.
Mid Gable Connection
BB1
BA1
STEP 6: Fasten together using Socket Cap Screw and Nuts. Level and square the whole
assembly. Tighten Screws and Nuts.
SECURE WITH FASTENERS
AC1
Date: Jan 2018 Page No: 9 of 19
INT_504a
BB2
BF
BB1
BB3
BA1