Teknion Beginning Work Table Installation Manual page 2

interpret
Installation Guides
Section: TABLES
Description: WORK TABLE BEGINNING. MIDDLE, FINISH WITH STRAIGHT AND ANGLED LEGS
Middle Work Table (WWTWM)
Middle Table
Worksurface with cut-out shown
as example
BI1
BG
BF
BB1
BD
BA1
BA3 BA2
Date:
INT_504a
Part and Product Identification
BA1 - Mid Gable
Assembly
(N02-2053) x1
BA2 - Leveler Cover
(A23-3670) x2
BA3 - End Cap
(B02-0389) x2
BC - 1/4-20 x 3 -1/2
Flat Hd, Mach Sc.
(E01-0771) x4
BD - Mid Gable Center
Spacer (A16-1652) x1
BE - 1/4-20x5/8
Mach. Screw
(E01-0098) x2
BG - Flush Plate
(A15-6948) x2
BI1 - Worksurface for Middle
Table with Cut-out
(C05-7496) x 1
OR
BI2 - Worksurface for Middle
Table without Cut-out
(C05-7495) x 1
OR
BI3 - Worksurface for Middle
Table with CALA Cut-out
(C07-2501) x 1
Jan 2018 Page No: 2 of 19
Rev. No: 1
BB1 - Transverse Beam
Sub-Assembly
(N02-1935) x2
BB2 - 5/16-18x2.5 Soc.
Head Cap Screw
(E01-0756) x16
BB3 - 5/16-18 Hex
Nut 1/2 A/F
.265 Thick
(E01-0755) x16
BF - Front Standoff
(B02-0381)x2 or 4
BH - #10 x .875" LG.
Quad Pan Screw
(E07-0077) x8