Function - cetis TeleMatrix 9700 Series User Manual

in the local environment, export that config file
and use it as a template configuration file in the
Mass Configuration tool to create others .
When the phone boots-up, it will by default
be configured to enable LLDP and DHCP . This
will help to navigate the network to the proper
VLAN and obtain its IP address as well as the
Provisioning Server's IP address through a DHCP
Server (DHCP Options 60/43 or DHCP Option 66
for tftp server address) . Once the phone has been
guided by the network to find the provisioning
server, it will attempt to download each of these
files, in order . If that file is not present, it will skip it
and move to to the next file.
The phone will attempt to download the
following files in this order:
global.cetis.cfg - this file will be one you
1 .
have exported with most shared values
macaddress.cetis.cfg (ex: 0019f30a1f2c .
2 .
cetis .cfg) the phone's individual MAC address
configID.cetis.cfg (ex: 78101 .cetis .cfg) You
3 .
create these to your numbering scheme .
partial.cetis.cfg
4 .
"change" file to make value changes after a
global file
5 . firmware.cetis.txt ( a list of firmware file
names that are present to be updated
Each phone will try to download its config file as
a global .cetis .cfg, or if that is not available, it will
move on to its unique <macaddress> .cetis .cfg .
If that file is not found, the phone will produce
an audio prompt ("doodle-doodle" or "Enter
ConfigID") tone as well as flashing lights to
prompt the user to enter a "Config ID" .
After inputting the ConfigID through the
numeric keyboard and ending with #, the phone
will download the configuration file named
<ConfigID> .cetis .cfg from the Provisioning Server .
If the download is successful, the phone will
9700 SERIES VOIP USER GUIDE: CETIS SIP 2020 M SERIES VOIP USER GUIDE: CETIS SIP 2017
(a supplementary
www.teledex.com www.telematrix.net
apply the configuration and re-boot . If it failed—
no file found or no server configured—the phone
will boot with default settings . You can also press
just # at the ConfigID prompt in order to skip the
download process and go to the idle state, where
you can then use the QuickKeys for diagnostics .
(pp26-27) .
Cetis has a Knowledgebase, where you can find
resource documents explaining programming
at https://support .cetis .com/portal email us at
sipsupport@cetis .com
Example Searches:
• Step-by-Step Deployment
• ConfigurationGenerator
• Global Redirect
• Firmware .cetis .txt

Function

1 . Support DHCP assigns IP address, etc .,
automatically
2 . Support PPPoE (used while connecting
ADSL, cable modem)
3 . Firmware and configuration can be
updated via HTTP, HTTPS, FTP, and TFTP
4 . Hold function
5 . Speed-dial
6 . DND (Do not disturb), black list, hotline
function
7 . Voicemail message
8 . Configurable via common browsers
9 . Remote management function
10 . Classification management for common
user's password and super-user's
password
11 . Support **codes function
12 . Call waiting
13 . Auto answer
14 . Call park
7 7