Operating Method For Dialing; How To Dial A Phone; Basic Call; Hold And Resume - cetis TeleMatrix 9700 Series User Manual

Keys Mode
1 Dialing
Config
2 Dialing
Config
3 Dialing
Config
4 Dialing
Config
5 Dialing
Config
6 Dialing
Config
7 Dialing
Config
8 Dialing
Config
9 Dialing
Config
0 Dialing
Config
* Dialing
Config
# Dialing
9700 SERIES VOIP USER GUIDE: CETIS SIP 2020
Function/Display
"1"or press for 3 s
to pick up voicemail
message
"1", "space", "@", "_",
"-", "/", "%"
"2"
"2", "a", "b", "c", "A", "B",
"C"
"3"
"3", "d", "e", "f", "D", "E",
"F"
"4"
"4", "g", "h", "I", "G", "H",
"I"
"5"
"5", "j", "k", "l", "J", "K",
"L"
"6"
"6", "m", "n", "o", "M",
"N", "O"
"7"
"7", "p", "q", "r", "s", "P",
"Q", "R", "S"
"8"
"8", "t", "u", "v", "T", "U",
"V"
"9"
"9", "w", "x", "y", "z",
"W", "X", "Y", "Z"
"0"
"0", "*", "#", "$", "&",
"?", "!", "<", ">"
"*"
"*", " . "
Dial as the first number
or finish number sign
www.telematrix.net
2. Operating Method
for Dialing

2.1 How to Dial a Phone

You can place calls after the phone is successfully
registered to a SIP server/IP-PBX . Please confirm
that all cables for power and network connectivity
are correct .

2.1.1 BASIC CALL

1 . Place a call using the handset:
Line 1/Line 2 is in off-hook status, dial
a number, and then dial # as the ending
character after the last digit to immediately
send the digits to the SIP server .
2 . Place a call using the speakerphone:
The phone has an active keypad . That
means pressing a number on the dial-pad
will take Line 1 off-hook: dial the number
and then dial # as the ending character
after the last digit to immediately send the
digits to the SIP server .

2.1.2 HOLD AND RESUME

1 . You can hold and resume calls . Only
one call can be active at any given time
on a corded phone; all other connected
calls must be placed on hold . Two-line
cordless phones can have up to two active
conversations .
1) Put a call on hold
Make sure the call you want to put on
Hold is enabled, then press the Hold key .
2) Resume a call from hold
Make sure the appropriate call is
enabled, then press the Hold key or
press the Line 1 or Line 2 key to resume
the call on whichever line was on Hold .
2 . Call Park feature
Enable Call Park feature and the Hold key
can be used as a Park key (see below) .
11