Related Manuals for cetis 3302IP
Summary of Contents for cetis 3302IP
- Page 1 3302IP VoIP Phone | User Manual 3302IP VoIP Phone | Users Manual www.CetisGroup.com www.CetisGroup.com...
-
Page 2: Table Of Contents
1.1 Overview of Hardware ---------------------------------------------------------------------------------------------------------- 2 1.1.1 ---------------------------------------------------------------------------------------------------------------------------------------------------- 2 1.1.2 ---------------------------------------------------------------------------------------------------------------------------------------------------- 2 1.2 Overview of Software ----------------------------------------------------------------------------------------------------------- 3 2. Handset keys for 3302IP -------------------------------------------------------------------------------- 4 2.1 Function table of keystrokes ------------------------------------------------------------------------------------------------- 4 2.1.1 Store numbers: ----------------------------------------------------------------------------------------------------------------------------- 4 ... - Page 3 3302IP VoIP Phone | User Manual Reference – Quick Keys ---------------------------------------------------------------------------------- 17 Reference – SIP Quick Start to Register a Single Phone -------------------------------------- 18 Program your connection under the VoIP -> SIP Configuration Screen ------------------------------------------------------------- 18 ...
-
Page 4: Functions
• Introduction • This is the user manual for the 3302IP. Some configuration is necessary before using the 3302IP phone. This • manual will illustrate how to set up the phone through keyboard and web User Interface (UI). 1.1 Overview of Hardware 1.1.1... -
Page 5: Overview Of Software
3302IP VoIP Phone | User Manual 1.2 Overview of Software Network Protocol SIP v1(RFC2543) • TFTP Client/DHCP Client/PPPOE Client • V2(RFC3261) • Telnet/HTTP Server • IP/TCP/UDP/RTP/RTCP • DNS Clients • IP/ICMP/ARP/RARP/SNTP • Codec G.711： 64K bit/s(PCM) • G.729A： 8k bit/s(CS-ACELP) •... -
Page 6: Handset Keys For 3302Ip
3302IP VoIP Phone | User Manual 2. Handset keys for 3302IP 2.1.5 Three-way conference call Suppose the user of the 3302IP phone is A, and if user 2.1 Function table of keystrokes B through VoIP phone to call user A, user B need to... -
Page 7: Current State
This page layout shows the work state of VoIP phone. Enable DHCP; The network part shows the connection state of WAN If there is DHCP server in your local network, 3302IP interface and LAN interface and the network setting; the will automatically obtain WAN port network information work state of Public SIP service of VoIP part, and here from your DHCP server. -
Page 8: Voip
Setting page of public SIP server: register expire time, default is 60 Register Expire Time: seconds. 3302IP will auto configure this expire time to the server recommended setting if it is different from the SIP server. Please refer to Value_add_service for detail. -
Page 9: Advance
Click Add to add new port mapping item and Delete to delete current port mapping item. Lease table name. Lease Table Name: Start IP of lease table. Start IP: End IP of lease table. Network device End IP: connecting to the 3302IP LAN port can dynamic obtain www.CetisGroup.com... -
Page 10: Stun
Access list support two type limits: input_access limit or output_access limit. Each type supports 10 items maximum. 3302IP firewall filter is base WAN port. So the source address or input destination address should be WAN port IP address. www.CetisGroup.com... -
Page 11: Vlan Configuration
TCP/IP/ Protocol Type: moment, the DSCP of SIP signals which between ICMP/UDP. 3302IP Phone and MGC. It will use Class Selector 5 (The value is 0xA0). And the DSCP of mediums port range if this rule Port Range: information (In RTP packets) would be used the values of DiffServ Value field. -
Page 12: Memory Key Programming
Enable/disable Call Waiting Enable Call Waiting: Enable Three Way Call: Please refer to Value_add_service for detail. If this option is disabled, 3302IP refuse Accept Any Call: the incoming call when the called number is different from 3302IP’s phone number. www.CetisGroup.com... -
Page 13: Call Park And Retrieve
: register to the address of VPN server VPN Server Addr example only. register to the port of VPN server VPN Server Port: 3.5.10 MMI Filter the group ID of UDP VPN Server Group ID: MMI filter is used to make access limit to 3302IP phone. www.CetisGroup.com... -
Page 14: Dial-Peer Dial Rule Setting
Config file export: export the config file Config file import: import the config file 3302IP phone support FTP and TFTP auto update, the gateway will auto obtain the configure file from your update server if configured. To obtain the original 3.7 Config Manage... -
Page 15: Auto Update
3302IP VoIP Phone | User Manual user may remain the concerned modules and remove other modules. Put the configure file in the root directory of update server when finish editing. 3.9 System Manage 3.9.1 Account Manage Set web access account or keypad password of 3.8.2... -
Page 16: Phone Book
Modifying the IP address of the computer, and making it the same net with 3302IP. Inputting the IP address of 3302IP in the browser, and then you can visit the setting layout of 3302IP after press the Enter key; super user account is admin/admin;... -
Page 17: Sip Setting
Register port of public SIP server. Register Server Port: - choose static; default port is 5060 - fill in the IP address of 3302IP in the IP address; Username of your SIP account Register Username: - fill in the subnet mask in Netmask;... -
Page 18: How To Use The Dial Rule
4.3 How to use the dial rule? 3302IP provide flexible dial rule, with different dial-rule configure, user can easily implement the following function: - Replace, delete or add prefix of the dial number. -
Page 19: Reference - Quick Keys
3302IP VoIP Phone | User Manual Reference – Quick Keys The TeleMatrix family of SIP phones has implemented an innovative way to determine various states of the SIP phone and the network it is attached to via the phone’s dial- pad. -
Page 20: Reference - Sip Quick Start To Register A Single Phone
Reference – SIP Quick Start to Register a Single Phone The Cetis, Inc SIP sets are SIP-only endpoints powered only by POE/802.3af and will acquire an IP address when met by a DHCP server. Begin by plugging your POE Ethernet cable into the WAN port. -
Page 21: Speed Dial And Touchlite Message Keys Are Programmed Under Advance -> Memory Key
3302IP VoIP Phone | User Manual Speed dial and Touchlite Message keys are programmed under Advance -> Memory Key MWI Number is the field for programming the Red Message Waiting Indicator Touchlite. In this example, it is programmed to dial number (7001) on the IP/PBX for retrieving voicemail messages.