Webui Management; System Settings; Logging Server; Time Settings - cetis TeleMatrix 9700 Series User Manual

3.5.4 WEBUI MANAGEMENT

In this section you may:
• View what configuration file version number is
loaded on the phone .
• Export the configuration file that is loaded on
the phone .
• Import a new configuration file version onto
the phone .
• View what firmware version number is loaded
on the phone .
• Import a new firmware version onto the
phone .

3.6 System Settings

The phone's system information (logging server,
time settings, user management, system actions,
and DECT settings (in case of cordless radio
handsets) are set on these pages .

3.6.1 LOGGING SERVER

Configure the Logging Server on this page .
Logging Server
Field Name Description
Logging Server Enable or disable system log
function . Default is disabled .
Server Address Set system log server's IP
address or domain name .
Server Port Set system log server's
port number . Default port is
49494, but is User Definable .
22
22
Field Name
Events Only
Events Plus
Periodic Status
Interval

3.6.2 TIME SETTINGS

Time settings such as Dailight Savings Time and
SNTP (Simple Network Time Protocol) servers
are configured on this page .
Time Settings
SNTP (Simple Network Time Protocol)—
Enabled by Default
Server Address 0 .pool .ntp .org by default .
Time Zone
Polling Interval SNTP server polling interval
Local Time
9700
www.teledex.com
www.telematrix.net
Description
Capture only significant
events (e .g ., Registration
Lost or IP address change or
Reboot requested) .
Capture events as well as a
periodic status (as defined
in the Interval—Status
update, e .g ., Registered,
Unregistered, Trying) .
Interval from 30 seconds
to 300 seconds to send
information to the syslog
server .
Select from GMT (Greenwich
Median Time + or - .
in seconds .
Manually configure time when
SNTP is disabled .
M SERIES VOIP USER GUIDE: CETIS SIP 2017
SERIES VOIP USER GUIDE: CETIS SIP 2020