Multicast Paging; Advanced Settings - cetis TeleMatrix 9700 Series User Manual

immediately by pressing the # key . It is also
possible to set the timeout from when the user
stops dialing until the digits transmit to the server
(between 1 and 9 seconds) .
Digital Map Configuration
Field Name Description
Dialing Rules Set dial ending rule . There are
Configuration three kind of rules:
• End with "#" .
• Erase Redial memory (default
is 60 s)—This is a guestroom
security feature .
• Auto Dial time is a timeout:
Set dial ending waiting time
in seconds . The default
timeout is 5 seconds .
User Defined Define your dial ending rule by
Rules prefix number and length . In the
example shown: 3xxx will cause
every 4 digit number dialed,
starting with a 3 to immediately
dial without the 5 second timeout .
So dialing 3004 would immediately
send those digits to the SIP PBX
and dial without a delay .
9700 SERIES VOIP USER GUIDE: CETIS SIP 2020 M SERIES VOIP USER GUIDE: CETIS SIP 2017

3.3.5 MULTICAST PAGING

Multicast paging allows the phone to receive
paging as defined in the listening address from
an audio source on the network and is a useful
safety feature in case of emergencies or for non-
safety related notifications .

3.3.6 ADVANCED SETTINGS

You can set NAT (Network Address Translation)
traversal function on this page .
Advanced Setting
Field Name
Enable
STUN Server
Address
STUN Server
Port
Check Interval
www.teledex.com www.telematrix.net
Description
Enable or disable NAT
(Network Address
Translation) Traversal
function . Default is disabled .
Set STUN server's IP
address .
Set STUN server's port
number .
Set check interval time . The
unit is second .
19 19