1.1 Overview of Hardware ---------------------------------------------------------------------------------------------------------- 2 1.1.1 ---------------------------------------------------------------------------------------------------------------------------------------------------- 2 1.1.2 ---------------------------------------------------------------------------------------------------------------------------------------------------- 2 1.2 Overview of Software ----------------------------------------------------------------------------------------------------------- 3 2. Handset keys of IP100 ----------------------------------------------------------------------------------- 4
2.1 Function table of keystroke -------------------------------------------------------------------------------------------------- 4 2.1.1 Store numbers: ----------------------------------------------------------------------------------------------------------------------------- 4 ...
Page 3
IP100 VoIP Phone | User Manual Reference – SIP Quick Start to Register a Single Phone -------------------------------------- 18
Program your connection under the VoIP -> SIP Configuration Screen ------------------------------------------------------------- 18 Speed dial and Touchlite Message keys are programmed under Advance -> Memory Key ----------------------------------- 19 ...
• Introduction • This is the user manual for the IP100. Some configuration is necessary before using the IP100 phone. This • manual will illustrate how to set up the phone through keyboard and web User Interface (UI). 1.1 Overview of Hardware 1.1.1...
IP100 VoIP Phone | User Manual 2. Handset keys of IP100 2.1.5 Three-way conference call Suppose the user of the IP100 phone is A, and if user B 2.1 Function table of keystroke through VoIP phone to call user A, user B need to make...
This page layout shows the work state of VoIP phone. Enable DHCP; The network part shows the connection state of WAN If there is DHCP server in your local network, IP100 will interface and LAN interface and the network setting; the automatically obtain WAN port network information from work state of Public SIP service of VoIP part, and here your DHCP server.
Setting page of public SIP server: register expire time, default is 60 Register Expire Time: seconds. IP100 will auto configure this expire time to the server recommended setting if it is different from the SIP server. Please refer to Value_add_service for detail.
Click Add to add new port mapping item and Delete to delete current port mapping item. Lease table name. Lease Table Name: Start IP of lease table. Start IP: End IP of lease table. Network device End IP: connecting to the IP100 LAN port can dynamic obtain www.CetisGroup.com...
Access list support two type limits: input_access limit or output_access limit. Each type supports 10 items maximum. IP100 firewall filter is base WAN port. So the source address or input destination address should be WAN port IP address. www.CetisGroup.com...
TCP/IP/ Protocol Type: moment, the DSCP of SIP signals which between ICMP/UDP. IP100 Phone and MGC. It will use Class Selector 5 (The value is 0xA0). And the DSCP of mediums port range if this rule Port Range: information (In RTP packets) would be used the values of DiffServ Value field.
3.5.10 MMI Filter Enable/disable auto answer function. Auto Answer: MMI filter is used to make access limit to IP100 phone. When MMI filter is enable. Only IP address within the DND, do not disturb, enable this option to No Disturb: start IP and end IP can access IP100 phone.
IP100 VoIP Phone | User Manual At the present, L2TP only support L2TP VPN Notice: 3.5.1 1 Audio Settings server under Linux, UDP only support a private UDP VPN server. select the prefer CODEC; support ulaw, alaw, CODEC: G729 and G7231 5.3/6.3 Signal standard for different area.
Config file export: export the config file MODULE> ConfFile Version Config file import: import the config file For instance: IP100 phone support FTP and TFTP auto update, the Gateway original version is: gateway will auto obtain the configure file from your <<VOIP CONFIG FILE>>Version: 1.0000 update server if configured.
IP100 VoIP Phone | User Manual 3.9.3 Phone Book 3.9 System Manage 3.9.1 Account Manage Set web access account or keypad password of IP100. 3.9.4 Time Set This page layout is the setting of time of phone. type the IP address of time server...
- choose static; - fill in the IP address of IP100 in the IP address; - fill in the subnet mask in Netmask; - fill in the router address or up Gateway address 4.
4.3 How to use the dial rule? Register port of public SIP server. Register Server Port: default port is 5060 IP100 provide flexible dial rule, with different dial-rule configure, user can easily implement the following Username of your SIP account Register Username:...
Page 18
IP100 VoIP Phone | User Manual Set up the Alias. We support four Alias Alias (optional): as below. Alias need to co-work with the Del Length: add prefix to the phone number, can add:xxx, set to reduce the dial length.
IP100 VoIP Phone | User Manual Reference – Quick Keys The TeleMatrix family of SIP phones has implemented an innovative way to determine various states of the SIP phone and the network it is attached to via the phone’s dial- pad.
Page 20
Reference – SIP Quick Start to Register a Single Phone The Cetis, Inc SIP sets are SIP-only endpoints powered only by POE/802.3af and will acquire an IP address when met by a DHCP server. Begin by plugging your POE Ethernet cable into the WAN port.
Page 21
IP100 VoIP Phone | User Manual Speed dial and Touchlite Message keys are programmed under Advance -> Memory Key MWI Number is the field for programming the Red Message Waiting Indicator Touchlite. In this example, it is programmed to dial number (7001) on the IP/PBX for retrieving voicemail messages.