1.1 Overview of Hardware ---------------------------------------------------------------------------------------------------------- 2 1.1.1 ---------------------------------------------------------------------------------------------------------------------------------------------------- 2 1.1.2 ---------------------------------------------------------------------------------------------------------------------------------------------------- 2 1.2 Overview of Software ----------------------------------------------------------------------------------------------------------- 3 2. Handset keys for 3300IP -------------------------------------------------------------------------------- 4
2.1 Function table of keystroke -------------------------------------------------------------------------------------------------- 4 2.1.1 Store numbers: ----------------------------------------------------------------------------------------------------------------------------- 4 ...
Page 3
3300IP VoIP Phone | User Manual Reference – Quick Keys ---------------------------------------------------------------------------------- 17
Reference – SIP Quick Start to Register a Single Phone -------------------------------------- 18
Program your connection under the VoIP -> SIP Configuration Screen ------------------------------------------------------------- 18 ...
• Introduction • This is the user manual for the 3300IP. Some configuration is necessary before using the 3300IP phone. This • manual will illustrate how to set up the phone through keyboard and web User Interface (UI). 1.1 Overview of Hardware 1.1.1...
2.1.6 Speed Dial Keys Mute Press Mute voicepath The 3300IP is configured with either 5 (MWD5) or 10 MWI - Flashing or Message Waiting TouchLite Indication and Speed (MWD) speed dial keys, programmable through the Dial web UI under Advanced ->...
This page layout shows the work state of VoIP phone. Enable DHCP; The network part shows the connection state of WAN If there is DHCP server in your local network, 3300IP interface and LAN interface and the network setting; the will automatically obtain WAN port network information work state of Public SIP service of VoIP part, and here from your DHCP server.
Setting page of public SIP server: register expire time, default is 60 Register Expire Time: seconds. 3300IP will auto configure this expire time to the server recommended setting if it is different from the SIP server. Please refer to Value_add_service for detail.
Click Add to add new port mapping item and Delete to delete current port mapping item. Lease table name. Lease Table Name: Start IP of lease table. Start IP: End IP of lease table. Network device End IP: connecting to the 3300IP LAN port can dynamic obtain www.CetisGroup.com...
Access list support two type limits: input_access limit or output_access limit. Each type supports 10 items maximum. 3300IP firewall filter is base WAN port. So the source address or input destination address should be WAN port IP address. www.CetisGroup.com...
TCP/IP/ Protocol Type: moment, the DSCP of SIP signals which between ICMP/UDP. 3300IP Phone and MGC. It will use Class Selector 5 (The value is 0xA0). And the DSCP of mediums port range if this rule Port Range: information (In RTP packets) would be used the values of DiffServ Value field.
Enable/disable Call Waiting Enable Call Waiting: Enable Three Way Call: Please refer to Value_add_service for detail. If this option is disabled, 3300IP refuse Accept Any Call: the incoming call when the called number is different from 3300IP’s phone number. www.CetisGroup.com...
3300IP VoIP Phone | User Manual In the example of Memory 2, (TS1107) will transfer MMI filter is used to make access limit to 3300IP phone. “silently” to extension 1107. ‘Silent’ means the user will When MMI filter is enable. Only IP address within the not hear the DTMF tones.
Config file export: export the config file Config file import: import the config file 3300IP phone support FTP and TFTP auto update, the gateway will auto obtain the configure file from your 3.7 Config Manage update server if configured. To obtain the original configure file, you can use the FTP/TFTP back up as www.CetisGroup.com...
3300IP VoIP Phone | User Manual describe above. Configure file using module structure, user may remain the concerned modules and remove other modules. Put the configure file in the root directory of update server when finish editing. 3.9 System Manage 3.9.1 Account Manage...
Modifying the IP address of the computer, and making it the same net with 3300IP. Inputting the IP address of 3300IP in the browser, and then you can visit the setting layout of 3300IP after press the Enter key; super user account is admin/admin;...
Register port of public SIP server. Register Server Port: - choose static; default port is 5060 - fill in the IP address of 3300IP in the IP address; Username of your SIP account Register Username: - fill in the subnet mask in Netmask;...
4.3 How to use the dial rule? 3300IP provide flexible dial rule, with different dial-rule configure, user can easily implement the following function: - Replace, delete or add prefix of the dial number.
#. If the password (in the existing config on the phone is 123, and the new config file is 1234.3300ip.txt), then the user would enter **77*123*1234#. The user should NOT be prompted for the password. The phone will then download the new config file 1234.3300ip.txt.
Reference – SIP Quick Start to Register a Single Phone The Cetis, Inc SIP sets are SIP-only endpoints powered only by POE/802.3af and will acquire an IP address when met by a DHCP server. Begin by plugging your POE Ethernet cable into the WAN port.
In this example, it is programmed to dial number (7001) on the IP/PBX for retrieving voicemail messages. Manual Programming - Programming the 3300IP via the LCD and Submerged Keys There are 2 submerged keys (above the 10 speed dial keys/underneath the faceplate). The left (store) key is used to store speed dials as well as enter the internal menu to check status and program the phone.