Related Manuals for cetis iPhone NDC 2200 Series
Summary of Contents for cetis iPhone NDC 2200 Series
- Page 1 NDC 2200 Series VoIP Phone | User Manual iPhone NDC 2200 Series VoIP Phone Users Manual www.CetisGroup.com...
-
Page 2: Table Of Contents
1.1.1 ------------------------------------------------------------------------------------------------------------ Error! Bookmark not defined. 1.1.2 ------------------------------------------------------------------------------------------------------------ Error! Bookmark not defined. 1.2 Overview of Software ----------------------------------------------------------------------------------------------------------- 3 2. Base Station keys for iPhone NDC 2200 Series ------------------------------------------------- 4 2.1 Function table of keystrokes ------------------------------------------------------------------------------------------------- 4 ... - Page 3 NDC 2200 Series VoIP Phone | User Manual 4.2.2 SIP setting: ---------------------------------------------------------------------------------------------------------------------------------- 16 4.2.3 IAX setting ----------------------------------------------------------------------------------------------------------------------------------- 16 4.3 How to use the dial rule? --------------------------------------------------------------------------------------------------- 16 Reference – Quick Keys ---------------------------------------------------------------------------------- 18 Reference – SIP Quick Start to Register a Single Phone -------------------------------------- 19 ...
-
Page 4: Function
This is the user manual for the iPhone NDC 2200 Series. Some configuration is necessary before using the • iPhone NDC 2200 Series phone. This manual will illustrate how to set up the phone through keyboard and web User Interface (UI). -
Page 5: Overview Of Software
NDC 2200 Series VoIP Phone | User Manual 1.2 Overview of Software Network Protocol SIP v1(RFC2543) • TFTP Client/DHCP Client/PPPOE Client • V2(RFC3261) • Telnet/HTTP Server • IP/TCP/UDP/RTP/RTCP • DNS Clients • IP/ICMP/ARP/RARP/SNTP • Codec G.711： 64K bit/s(PCM) •... -
Page 6: Base Station Keys For Iphone Ndc 2200 Series
NDC 2200 Series VoIP Phone | User Manual 2. Base Station keys for iPhone 2.1.5 MWI – Message Waiting Indication NDC 2200 Series The Messages key serves as an indicator that messages are present as well as a speed dial key to dial in and retrieve those messages. -
Page 7: Current State
Support static IP, dynamic obtain IP and PPPoE. Configure Static IP - Enable Static; - Set iPhone NDC 2200 Series’s IP address in the IP Address; - Set netmask in the Netmask field; - Set router IP address in the Gateway;... -
Page 8: Voip
NDC 2200 Series VoIP Phone | User Manual - Set local DNS server in the Preferred DNS and 3.4 VoIP the Alternate DNS。 3.4.1 SIP Config Configure to dynamic obtain IP Setting page of public SIP server: Enable DHCP;... -
Page 9: Advance
SIP as default Co-work with the Auto Detect Server, Detect Interval Time: if Auto Detect Server is enable, iPhone NDC 2200 Series will periodically detect if the SIP server is available according this setting. -
Page 10: Nat
NDC 2200 Series VoIP Phone | User Manual connecting to the iPhone NDC 2200 Series LAN port can dynamic obtain the IP in the range between start IP and end IP. DHCP server lease time. Lease Time: Netmask of lease table. -
Page 11: Net Service
Internet (input rule), communication priority in the data link/MAC sub-layer. or prevent unauthorized private network devices to iPhone NDC 2200 Series will sort the packets using the access the internet. QoS and sends it to the destination. -
Page 12: Digital Map
DSCP of SIP signals which between digits numbers begin with 9 will be sent 955xx5 iPhone NDC 2200 Series Phone and MGC. It will use immediately. Class Selector 5 (The value is 0xA0). And the DSCP of mediums information (In RTP packets) would be used... -
Page 13: Memory Key Programming
NDC 2200 Series VoIP Phone | User Manual number is different from iPhone NDC 2200 Series’s phone number. In the example of Memory 2, (TS1107) will transfer no answer call forward time setting. No Answer Time: “silently” to extension 1107. ‘Silent’ means the user will not hear the DTMF tones. -
Page 14: Mmi Filter
NDC 2200 Series VoIP Phone | User Manual : register to the address of VPN server VPN Server Addr 3.5.10 MMI Filter register to the port of VPN server VPN Server Port: MMI filter is used to make access limit to iPhone NDC... -
Page 15: Config Manage
NDC 2200 Series VoIP Phone | User Manual Through clicking on the "browse" button to open the upgrade file or configuration file, then click on "Update" button. After the upgrade, iPhone NDC 2200 Series will automatically restart. FTP Update:... -
Page 16: System Manage
NDC 2200 Series VoIP Phone | User Manual auto provision mode; Disable: not auto Update Mode: set the MGR log level MGR Log Level: update，Update after reboot: auto update after reboot，Update at time interval: auto update after a set the SIP log level... -
Page 17: Mmi Set
- choose static; - fill in the IP address of iPhone NDC 2200 Series 4. Operating Method for Dialing in the IP address; - fill in the subnet mask in Netmask;... -
Page 18: Sip Setting
NDC 2200 Series VoIP Phone | User Manual - choose DHCP option. Phone number of your SIP account Phone Number: - choose Enable Register； Now, if the network has DHCP server, then iPhone NDC 2200 Series will get IP address, Netmask,... - Page 19 NDC 2200 Series VoIP Phone | User Manual prefix. You can click “Add” to add a new dial rule. Below is the detail setting of the dial-rule: The Number suit for this dial rule, can Phone Number: be set as full match or prefix match. Full match means that if the number user dialed is completely the same as this number, the call will use this dial-rule.
-
Page 20: Reference - Quick Keys
NDC 2200 Series VoIP Phone | User Manual Reference – Quick Keys The TeleMatrix family of SIP phones has implemented an innovative way to determine various states of the SIP phone and the network it is attached to via the phone’s dial- pad. -
Page 21: Reference - Sip Quick Start To Register A Single Phone
NDC 2200 Series VoIP Phone | User Manual Program your connection under the VoIP -> SIP Reference – SIP Quick Start to Configuration Screen Register a Single Phone The Cetis, Inc SIP sets are SIP-only endpoints powered only by POE/802.3af and will acquire an IP address when met by a DHCP server. -
Page 22: Reset To Factory Default
NDC 2200 Series VoIP Phone | User Manual MWI Number is the field for programming the Red Message Waiting Indicator Touchlite. In this example, it is programmed to dial number (7001) on the IP/PBX for retrieving voicemail messages. Manual Programming - Programming the 3300IP... -
Page 23: Reference - Dect Handset Management
NDC 2200 Series VoIP Phone | User Manual Only 5 total handsets can be registered to a base. When a sixth one tries to register to the base it fails. The Reference – DECT Handset next procedure deletes the handset registrations so that Management you can start again.
Need help?
Do you have a question about the iPhone NDC 2200 Series and is the answer not in the manual?
Questions and answers