Hollow Drill Sharpener - Challenge JO Instructions And Parts Manual

Replacement Cutting Bit

11.6 Hollow Drill Sharpener

For fast, easy drill sharpening
body. To prevent personal injury and/or damage to the drill, ALWAYS keep drills in protected area.
Here's a unit that really makes drill sharpening easy. All you do is place the hollow drill in the tapered
end of the drill holder, insert the unit on the cylinder, then turn two or three times...and you have a
perfectly sharpened drill.
This Challenge Hollow Drill Sharpener can pay for itself many times over through longer drill life,
easier, faster drilling, and less sharpening time. All sizes of drills from
sharpened.
The drill sharpener automatically puts just the right amount of bevel on the hollow drill for the best
drilling results. It's self-centering, too, so that the center of the sharpening bit exactly meets the
center of the hollow drill. The drill sharpener also has a replaceable sharpening bit.
Challenge Hollow Drill Sharpener
Extra Cutting Bit
Instructions:
NOTE: Always handle carefully!
1. Be sure to wipe off all grease before using the sharpener.
2. Remove any paper chips from the hollow drill.
3. Place the hollow drill in the drill holder section. Insert the sharpening section, being very
careful to bring the drill and cutting tool together without bumping.
11.0 Accessories for Challenge Paper Drilling Machine
Part No. 6469
Drills are sharp even after use. Be careful to keep edge away from your
Part No. A-4950
Part No. 4952
/ to / inch in diameter can be
1 8 1 2
27