Table of Contents
Advertisement
3-Point Seat Belt
3-point seat belts are provided for all sitting
positions in the vehicle. The following
instructions describe how to wear the 3-
point type seat belts correctly.
1.
Pick up the latch plate and pull the seat
belt across the body. Do not allow the
seat belt to remain twisted.
If the seat belt is pulled across the body too
quickly, the 3-point type seat belt may be
locked. If this occurs, allow the seat belt to
retract slightly to unlock it. Then, pull the
seat belt across the body slowly.
Seat and Restraint System
2.
Push the latch plate into the buckle until
a clicking sound is heard. Pull the latch
plate and make sure that it is securely
locked. Confirm the position of the
release button on the buckle so that you
can release the seat belt quickly if nec-
essary. If a shoulder belt height adjuster
is provided, move it to a height suitable
for you. For instructions for use and
important safety information, refer to
"Shoulder Belt Height Adjuster" in Sec-
tion 4 "Seat and Restraint System"
3.
The crotch belt portion can be retracted
by pulling the shoulder belt up.
4.
To release the seat belt, press the red
button on the buckle. The seat belt
should be retracted to its original state.
Make sure that the seat belt is not
caught by the door before closing the
door. If the door is closed forcibly with a
seat belt caught, both seat belt and
vehicle may be damaged.
85
1
2
3
4
5
6
7
8
Advertisement
Table of Contents
