Geely Emgrand 2015 Manual page 31

Operation of Light Control Combi-
nation Switch
Position Light
Turn the light control switch (1) toward A
until the mark points to
the position lights, instrument panel lights
and lights on the control switch will illumi-
nate. Turn the light control switch (1) toward
B until the mark points to OFF position,
then the position lights, instrument panel
lights and lights on the control switch will
turn off.
Auto Light
Turn the light control switch (1) toward A
until the mark points to AUTO position to
activate the automatic lighting function.
Then, the intelligent light system turns the
headlight on and off automatically based on
the level of ambient light.
The intelligent light system can recognize
the road conditions, such as dark day or
tunnel light to control the position light and
low beam light automatically. The position
lights and low beam lights are turned on
automatically within 1 to 2 seconds when
the vehicle enters the tunnel and turned off
automatically within 1 to 2 seconds when
the vehicle leaves. This system will also
turn on the position lights and the low beam
lights when the ambient light is dim.
Note: Under the AUTO mode, the system
has a manual priority function. If there
are light signals input, the system will
position, then
exit the automatic light mode.
Headlight Low Beam
Turn the light control switch (1) toward A
until the
low beam lights will illuminate. Turn the light
control switch (1) toward B until the
points to OFF position, then the low beam
lights will turn off.
Switching of High Beam and Low
Beam
With the low beam lights on, push handle
(3) to the stop position toward C to turn on
the high beam lights. Pull back handle (3)
toward F to switch to the low beam lights.
Headlight Flasher
Pull handle (3) toward F to the stop position
to illuminate the headlights. The headlights
will turn off after the handle is released.
Left Turn Signal Light
Pull handle (3) toward E to flash the left
turn indicator. After turning, the handle 3 will
return to its original position automatically
and the turn signal light will turn off.
Right Turn Signal Light
Pull handle (3) toward D to flash the right
turn indicator. After turning, the handle 3 will
return to its original position automatically
and the turn signal light will turn off.
Rear Fog Light
With the low beam lights on, turn the fog
control switch (2) toward A until
the
29
Instrument and Controls
mark points to
mark to turn on the rear fog lights.
1
2
position, the
mark
3
4
5
6
7
points to
8