Table of Contents
Advertisement
5.
Place the infant in the child seat and
buckle the infant up.
Improper installation of a rear-facing
infant seat to the ISOFIX anchorages
can lead to failure of the restraint. The child
could be badly injured or killed in a collision.
Follow the child restraint manufacturer's
directions exactly when installing an infant
or child restraint.
Child restraint anchorages are designed to
withstand only those loads imposed by cor-
rectly-fitted child restraints. Under no cir-
cumstances are they to be used for adult
seat belts, harnesses, or for attaching other
items or equipment to the vehicle.
Install the child restraint system when the
vehicle is stationary. The ISOFIX child
restraint system is correctly fixed to the
anchorages when you hear the click.
Seat and Restraint System
Installation of Booster Seat
Allow children to seat on the child restrains.
According to the instructions provided by
manufacturer, pass the crotch and shoulder
belts through or around the child, and insert
the latch plate into the buckle. Make sure
that the belts are not twisted. Verify that the
shoulder belt is passed through the shoul-
der of the child, and the crotch belt is as low
as possible and snug across the child's
hips. Refer to "Seat Belt" in Section 4 "Seat
and Restraint System" for details.
Press the buckle release button when the
child restrain needs to be removed. Allow
the seat belt to retract, and then the seat
belt will return to the general function.
107
1
2
3
4
5
6
7
8
Advertisement
Table of Contents
