Table of Contents
Advertisement
When securing the child restraint on the
rear seating position, read the instruction
provided along with the child restraint to
make sure that it is suitable for this vehicle.
No matter where the child restraint is
installed, make sure that the child restraint
is correctly secured.
Remember
that
the
restraint may move and hit the persons in
the vehicle in the event of collision or sud-
den braking. Always keep the child restraint
correctly secured in the vehicle, even if
there is no child.
Installation of ISOFIX Child
Restraint
Installation of Forward-facing Child
Seat
The child restrain is installed on the rear
seat with special anchorages which con-
form to ISO regulations. The anchorages
are installed on the left and right gaps
between the cushions and backs of the two
rear seats. The child restrain which con-
forms to ISO standard can be secured with
these special anchorages. In this case, it is
not necessary to use a seat belt to secure
the child restrains.
unsecured
child
103
Seat and Restraint System
Consult the manufacturer of the child
restrains to confirm if the Child
Restrains is suitable for this kind of anchor-
ages.
Follow the procedure below to install a child
safety seat which needs a top tether.
1.
Lower the head restraints to the lowest
position.
2.
Open the cover of the anchorage lever.
1
2
3
4
5
6
7
8
Advertisement
Table of Contents
