Geely Emgrand 2015 Manual page 28

Table of Contents

Advertisement

Instrument and Controls
Engine System Malfunction Indica-
tor - Yellow
When the ignition switch is turned to
ON position, the indicator should illu-
minate. After the engine started, the indica-
tor should go off. If it illuminates while
driving, this indicates that there is a mal-
function in the engine control system. Have
your vehicle repaired by the Geely Service
Station immediately.
Engine Emission Malfunction Indi-
cator - Yellow
When the ignition switch is turned to
ON position, the indicator should illu-
minate. After the engine started, the indica-
tor should go off. If it illuminates while
driving, this indicates that there is a mal-
function in the engine control system, the
engine emission is beyond the standard
level and the engine may be damaged.
Have your vehicle repaired by the Geely
Service Station immediately.
TCU System Malfunction Indicator
- Yellow
When the ignition switch is turned to
ON position, the indicator should illu-
minate. After the engine started, the indica-
tor should go off. If it illuminates while
driving, this indicates that there is a mal-
function in CVT automatic transmission.
Battery Indicator - Red
When the ignition switch is turned to
ON position, the indicator should illu-
minate. After the engine started, the indica-
tor should go off immediately. If it does not
go off, this indicates that there is a malfunc-
tion in the charging system of the vehicle.
Contact Geely Service Station as soon as
possible.
If the drive belt of the engine is bro-
ken or loose, you shall not continue
driving.
High-beam Indicator - Blue
This indicator illuminates when the
high-beam lights are turned on.
Rear Fog Light Indicator - Yellow
This indicator illuminates when the
rear fog lights are turned on.
Daytime Running Light - Green
This indicator illuminates when the
engine is running. The daytime run-
ning light turns off automatically when the
headlights are turned on. However, it does
not turn off if the headlights flash intermit-
tently at a short interval.
High Coolant Temperature Indica-
tor - Red
When the ignition switch is turned to
ON position, the system will perform
self-check first and this indicator will remain
illuminated for a few seconds and then go
off. This indicator illuminates when the
engine coolant temperature is too high. In
this case, stop the vehicle and shut off the
engine at once. Have your vehicle repaired
by the Geely Service Station immediately.
The pressure in the cooling system is
extremely high when the engine is
hot. Do not open the coolant reservoir cap
until the engine has cooled sufficiently.
Also, do not touch the radiator fan when the
engine is stopped! The fan may turn sud-
denly!
26

Advertisement

Table of Contents
loading

This manual is also suitable for:

Emgrand 2016Emgrand 2017Emgrand 2018Emgrand 2019

Table of Contents