Table of Contents
Advertisement
Operation Instruction - Radio Mode
The radio provided for the vehicle has two
formats:
•
FM - 87.5MHz ~ 108.0MHz 100KHz
step
•
AM - 522KHz ～ 1629KHz 9KHz step
ON/OFF and Volume Control
Press and release the center knob to turn
the radio on, and press it again to turn the
radio off. Turn the knob left to decrease the
volume and turn right to increase the vol-
ume.
Automatic Seek Station
Press and release
up or down for a station automatically and
will stop on reception automatically. If you
press the same direction button again when
searching, the position of the station will
return to the previous one before searching.
If you press the opposite seek button again,
the frequency will be searched in the oppo-
site direction automatically. The automatic
seek station operation can be stopped by
changing the bands and modes or turning
the radio on and off, and the position of the
station will return to the previous one before
searching.
Storing Position of Current Station
When a certain station is played, the current
station can be stored to the corresponding
position of the station if you press and hold
buttons 1/PAU, 2/SCAN, 3/RPT, 4/RDM, 5/
or 6/
.
Recalling Position of Preset Station
If you press and release buttons 1/PAU, 2/
SCAN, 3/RPT, 4/RDM, 5/
number of the preset station can be recalled
as the station you are currently playing.
Air Conditioning and Entertainment System
or
button to seek
or 6/
, the
Changing Band
Press and release the BND/CLK button to
cycle among the bands in the order of FM1,
FM2, FM3, AM1 and AM2.
Auto Store (AS)
Press and release the AS/SEL button to
activate this function. The program will
search the available information from the
station within current band automatically.
The display will show the frequencies of the
current band which are searched automati-
cally in the order from low to high. After
searching, the strong station will be stored
in the corresponding band automatically.
Take FM band as an example:
After the AS function is activated, the fre-
quencies stored in the previous band will be
cleared. The radio will search the available
frequencies within the range from 87.5MHz
to 108.0MHz. After 6 stations are searched,
it will store them first. The signal strength of
subsequently searched stations will be
compared with that of the previous 6 sta-
tions. The frequencies with poor strength
will be replaced one by one until the search
is finished. Then, the final 6 stations will be
ordered according to the frequencies and
stored to the corresponding number of the
station respectively.
If the button is pressed during auto store
(AS), it will return to its previous state. The
AS operation can be stopped by changing
the bands and modes or turning the radio
on and off.
Unavailable Radio Station Mute
When the radio is in a place where the sta-
tion is unavailable, the sound will be set to
the low volume automatically. When the sig-
nal level is less than 15dB, the sound will
also be set to low volume automatically,
avoiding unpleasant noise from the radio.
61
1
2
3
4
5
6
7
8
Advertisement
Table of Contents
