Table of Contents
Advertisement
Skipping Songs
If you press and hold the 5/
head unit will fast forward 10 songs and
start playing. If you press and hold the 6/
button, the head unit will fast rewind 10
songs and start playing.
Audio
Volume Adjustment
Turn the center knob right to increase the
volume and left to decrease the volume.
Menu of Audio Settings
After entering the selection screen by
pressing and holding the AS/SEL button,
you can enter BASS, TREBLE, BALANCE
and FADER adjustment modes in turn by
pressing the AS/SEL button, and adjust the
audio setting by turning the center knob.
•
BASS mode: Turn the center knob fully
clockwise to enhance BASS effect, and
fully counterclockwise to weaken the
BASS effect.
•
TREBLE mode: Turn the center knob
fully clockwise to enhance TREBLE
effect, and fully counterclockwise to
weaken the TREBLE effect.
•
BALANCE mode: Turn the center knob
fully to the right of the BALANCE clock-
wise and fully to the left of the BAL-
ANCE counterclockwise.
•
FADER mode: Turn the center knob to
the rear-most position of the FADER
clockwise and to the front-most position
of the FADER counterclockwise.
Note: If the EQ setting is not OFF, both
the BASS and TREBLE functions are set
to off.
Air Conditioning and Entertainment System
EQ Adjustment
After entering EQ OFF screen by pressing
button, the
and holding the AS/SEL button, you can
select several preset equalizer modes such
as OFF / POP / CLASSIC / ROCK / JAZZ in
turn by turning the knob.
Note: In these cases, the EQ OFF screen
will be turned off if the center knob is not
turned within 3 seconds,
Mute Setting
You can perform the mute setting in any
modes by pressing and releasing the MUTE
button. If you press and release this button
again or turn the center knob, the mute
function will be canceled.
Time Display Mode
In the time display mode, press and release
the BND/CLK button to return to the display
status of the current play mode (Radio /
USB / AUX).
In the Radio / USB / AUX display mode, the
system will skip to the time display mode if
there is no any operation within 10 seconds.
Time Display Setting
In the Radio / USB / AUX display mode,
press and hold the BND/CLK button over 2
seconds to enter the time setting mode.
1.
In the time setting mode, press and hold
the BND/CLK button to cycle through
"hour / minute / 12-hour format / 24-
hour format" ； rotate the knob to adjust
the corresponding options (hour / min-
ute / 12-hour format / 24-hour format).
2.
After the time adjustment is complete in
the time setting mode, press and hold
the BND/CLK button over 2 seconds or
there is no any operation within 5 sec-
onds, the system will return to the nor-
mal time display status.
63
1
2
3
4
5
6
7
8
Advertisement
Table of Contents
