Table of Contents
Advertisement
2.
Insert a small flathead screwdriver into
the port of the protective cover for the
unlock button and pry it off from the
panel.
3.
Insert the screwdriver straight into the
opening under the protective cover until
the unlock button in the opening is
pressed.
4.
You can move the shift lever while
pressing and holding the unlock button.
Towing Vehicle
All the towing operations should use the
safety chain system and abide by the local,
provincial and national laws. The wheels
and axles contacting the ground must be in
a good condition. Once damaged, the con-
verter dolly shall be used.
Hints for Towing
1.
When using the flexible towing device
(e.g. towing rope), the distance between
towing vehicle and the vehicle to be
towed should be greater than 4 meters
and less than 10 meters. For the vehicle
to be towed with a brake failure, a rigid
towing device (e.g. towing bar) should
be used to tow the vehicle.
2.
The hazard warning lights on the towing
vehicle and the vehicle to be towed
should be switched on.
3.
If the vehicle to be towed is equipped
with the VT2 continuously variable
transmission, please pay attention to
the following items:
•
Shift the shift lever to the neutral posi-
tion (N).
•
Don't tow the vehicle at the speed of
more than 50 km/h.
•
The towing distance must not exceed
50 kilometers.
When using a dedicated towing vehicle, it is
only allowed to lift the front wheels of the
vehicle to towed.
Never tow the vehicle with the VT2
continuously variable transmission
and its front wheels landing on the ground
from the rear of the vehicle, otherwise it will
lead to serious damage to the transmis-
sion.
149
In an Emergency
1
2
3
4
5
6
7
8
Advertisement
Table of Contents
