Table of Contents
Advertisement
Starting and Driving
Manual Transmission (MT)
5-Speed Gearbox
Notices for Use
The following information is very important
for vehicle driving, especially for these
users who are not familiar with the manual
transmission:
1.
Before starting the engine, push the
transmission shift lever in the neutral
position and tighten the parking brake.
2.
After starting the engine, press the
clutch pedal and keep the parking brake
applied, and then shift the lever to first
gear or Reverse (R).
3.
Release the parking brake, and then
slowly lift the clutch pedal and slowly
press the accelerator pedal at the same
time, the vehicle will start off smoothly.
Gear Shifting
1
3 5
2 4 R
6-Speed Gearbox
1
3 5
2 4 6
Shifting to Forward Gears
Shift to forward gears according to the Gear
Pattern on the knob of the shift lever. To
shift up or down, you must fully press the
clutch pedal and then release the clutch
pedal after shifting gears.
Never press the clutch pedal when no need
to shift gears, otherwise it will easily cause
excessive wear of the clutch or sudden loss
of the power.
To shift to the high gear, you should adopt
the appropriate shift point to make shift
more smooth.
To shift the high gear to the low gear, you
should slow down your vehicle to a lower
speed, and then carry out the shift opera-
tion so as not to do damage to the transmis-
sion or cause the vehicle transmission
system to break down.
132
R
EC7-0141
Advertisement
Table of Contents
