Table of Contents
Advertisement
Service and Maintenance
Manual Transmission (5MT)
1.
Loosen the 2 clips on the top of the
case for engine air cleaner/filter ele-
ment.
2.
Lift up the cover case of the filter ele-
ment to remove it from the engine.
3.
Pull out the filter element.
4.
Check or replace the engine air cleaner/
filter element.
5.
Put the air cleaner/filter element in and
install the cover case of the filter ele-
ment.
6.
Engage the 2 clips and tighten the cover
in place.
Running the engine without the air
cleaner/filter element installed may
cause you or others to get burnt. The air
cleaner can not only purify the air, but also
prevent naked flames when the engine
backfires. If the engine backfires because
the air cleaner is not installed, you may be
burnt. Do not drive the vehicle before the air
cleaner is installed. Also, you should be
careful when working on an engine while
the
air
cleaner/filter
installed.
element
is
not
174
If the air cleaner or filter element is
not installed, the engine may catch
fire as a result of backfire, causing dam-
ages to the vehicle . In addition, the dust
can enter the engine easily and cause dam-
ages to the engine. Therefore, you must
drive the vehicle with air cleaner installed.
Advertisement
Table of Contents
