Disassembling The Power Supply Unit - Beckhoff CX2100-0014 Manual

Decommissioning
8.2

Disassembling the power supply unit

The CX2000 Embedded PC series is a modular system and enables individual modules to be replaced or
removed quite easily. This section describes how to remove devices from the CX2000 Embedded PC series.
Requirements:
• All cables were removed from the Embedded PC.
Dismantle the Embedded PC as follows:
1. Release the DIN rail mounting by pushing the latches outwards with a screwdriver.
2. Pull the orange strap on the power supply unit and gently remove the device from the DIN rail.
46 Version: 1.2 CX2100-0014