Using The Control Unit; Start / Stop Cleaning - Zodiac VX65 iQ Vortex-Pro Owner's Manual

Page 16

Using the Control Unit

The control unit can be used to initiate basic cleaning features and to connect the device to home
Wi-Fi. For more information on connecting your cleaner to Wi-Fi functions, see section 5, Installing
™
iAquaLink .
Lit when in Wi-Fi to Phone Mode
LED: Direct Connection (RED)
Wi-Fi to Phone
Button
Dirty Canister
Indicator
Select Cleaning Surface
• Floor
• Floor and Wall
• Waterline

Start / Stop Cleaning

The factory default cleaning surface setting is Floor and Wall
Use
Toggle between:
With cleaner submerged in the water, press
The control box will display the time remaining for the selected cycle in hours and
minutes.
NOTE: The control box automatically goes into standby mode after 10 minutes and the display screen turns
Press
Zodiac VX65iQ Robotic Pool Cleaner
®
Lit to Confirm Connection.
LEDs:
to change cleaning surface setting.
Floor Only
off. Press any key to exit standby mode and view remaining cycle time. Cleaner will continue to
function in standby mode.
to interrupt and cancel an in-progress cleaning cycle.
|
Owner's Manual
LAN Connection (RED)
WEB Connection (RED)
, Floor and Wall
to begin operation.
View Time Remaining
and Error Display
Use to Remove
Cleaner
from Pool
Start/Stop Cleaner
Operation
Figure 15. Cleaner Control Unit
.
and Waterline only