Table of Contents
Advertisement
4.
Returns procedure
If any equipment has to be returned for repair or servicing, please note the following precautions to be
taken to ensure safe passage:
WARNING: Risk of explosion.
This is particularly important with respect to Explosion Proof components, where damage to the outer body or
to flame paths is evident (or suspected). Failure to ensure that components are fully fit for the task might
invalidate their certification rendering the equipment unsafe to use in a hazardous environment.
Always contact your Pearpoint representative in advance.
1.
Retain the original packaging material and re-use wherever possible.
2.
If the original packaging material is not available, select a heavy duty cardboard box and make
3.
liberal use of bubble pack or polystyrene material to cushion and prevent movement of the
component.
Clearly identify all equipment with the customer's name and address.
4.
Where relevant, attach "Fragile" and "This Way Up" labels to the packaging.
5.
6.
To the outside of one box, attach a copy of your order or work instructions. Enclose these in an
envelope, including your name and address.
Never transport generators with fuel on board.
7.
Always clean all contamination from the equipment prior to sending it to Pearpoint.
8.
9.
Rods must be securely retained within the coiler or transportation cage.
10. Equipment should be insured for carriage damage or loss.
P571 flexicoiler Operation Manual 37
Advertisement
Table of Contents
